PA 6 Polyamide
Semi-crystalline polyamide polymer of chemical origin with good general characteristics and excellent performance / cost ratio. Resistant to abrasion, compression, traction and has good impact resistance. Self-lubricating, resistant to aging and atmospheric agents. Particularly suitable for the passage of oil and grease at low pressure.
Operating temperature from -10°C to + 80°C
Tolerances: ± 0.05 on the Ø and up to 10mm, ± 0.10 on the Ø and from 12 to 18mm.
Applications: Widely used in the mechanical industry for simple gears Read More...
Discover more
PA 6.6 Polyamide
Polyamide 6.6 of chemical origin possesses characteristics of high resistance, low hygroscopicity and good dimensional stability.
The greater rigidity decreases its vibration absorption power and impact resistance. Resistant to wear, traction, compression, aging and atmospheric agents, it has an antistatic behavior. Particularly suitable for the passage of oil and grease at medium – low pressure.
Temperature from 0°C to + 100°C
Tolerances: ± 0.07 on the Ø.
Applications: It is used for mechanical parts that are highly stressed or exposed to low temperatures. Read More...
Discover more
Low density polyethylene
Food compatibility FDA ECC 90/128.
Operating temperature from -10°C to + 60°C.
Tolerances: ± 0.07 on Ø and 10, ± 0.1 on Ø and 12 to 32, ± 0.5%
Applications
Used in components of the chemical industry
Physiologically inert, it is approved for use in contact with food and tools for their maintenance. Excellent dielectric characteristics and stability to bad weather, suitable for mechanical use for bearings or mechanical parts at low loads.
Read More...
Discover more
HD polyethylene – high density
We cut slabs or rolls in continuous profiles in square or rectangular sections, with the possibility of having them adhesives or not adhesives.
High density polyethylene of chemical origin.
It has low specific weight and FDA ECC 90/128 food compatibility.
It is a product with low moisture absorption and excellent resistance to chemical agents and shocks even at low temperatures.
Temperature: from – 10°C to + 60°C.
Applications
Used in components of the chemical industry.
Physiologically inert, it is approved for use in contact with Read More...
Discover more
PTFE Teflon®
PURE PTFE is self-lubricating, dielectric, non-stick, resistant to solvents, chemicals and aging. Fluorinated material widely used due to its excellent chemical, electrical and thermal properties, in fact the friction coefficient is very low, the use for technical details is limited to low mechanical strength and wear.
It has a low friction coefficient, excellent chemical inertness, excellent thermal resistance at both low and high temperatures.
Operating temperature -60°C + 260°C.
Resistant to atmospheric agents and UV rays.
Applications
Excellent chemical applications for its very Read More...
Discover more
PA11 PHL Rilsan®
We realize molded profiles and tubes with extrusion technology, producing any kind of shape, from the simplest to the most complex ones. We cut slabs or rolls in continuous profiles in square or rectangular sections, with the possibility of having them adhesives or not adhesives.
The only existing Bio-Polyamide 11 of vegetable origin derived from castor oil. We produce a wide range of flexible hoses in 12 different colors, mono linear, multiple and spiral for the different applications in the Read More...
Discover more
PA12 PHL Rilsan®
We realize molded profiles and tubes with extrusion technology, producing any kind of shape, from the simplest to the most complex ones. We cut slabs or rolls in continuous profiles in square or rectangular sections, with the possibility of having them adhesives or not adhesives.
Polyamide 12 of chemical origin is flexible and resistant to low temperatures. We produce a wide range of tubes in 8 different colors, linear and spiral.
Applications: the tubes are suitable for use on braking systems.
Raw Read More...
Discover more
PA12 self-extinguishing
Applications: Are obtained little tubes which have been used for a long time in the sectors: Marine, Automotive Industry, Mechanical Construction, in the medical field, etc.
Operating temperature -30°C + 70°C.
Tolerances: ± 0.07 on Ø and up to Ø 12mm, ± 0.1 on Ø and from Ø 14 to 24mm, ± 0.15 on Ø and from Ø25 to 40mm.
Product suitable for centralized air systems
Read More...
Discover more
PA12 Antistatic
We realize molded profiles and tubes with extrusion technology, producing any kind of shape, from the simplest to the most complex ones. We cut slabs or rolls in continuous profiles in square or rectangular sections, with the possibility of having them adhesives or not adhesives. Polyamide 12 of chemical origin antistatic.
Temperature: from -30 ° C to + 80 ° C
Tolerances: ± 0.1 on Ø e.
Product suitable for eliminating electrostatic charges.
Engaged in petrol pumps and knitwear by contact with synthetic Read More...
Discover more
Spirals PA11 PHL
We produce tubes with extrusion technology and have numerous sizes in stock. We cut from sheets or rolls in continuous square or rectangular section profiles with the possibility of having them adhesive and non-adhesive.
Made with material compliant with the international standards in force for the sector: SAE, NF, DIN, BS, ISO.
Made in more than 10 different colors.
Temperatures: from -40°C to + 80°C.
Tolerances: ± 0.07 on Ø and up to 10mm, ± 0.1 on Ø and from 12 to 25mm, Read More...
Discover more
Spirals PA12
We have products for braking systems equipped with fittings:
Fixed female M18x1.5,
Fixed male M16x1.5,
Swiveling male M16x1.5,
Bicone fitting,
Reinforcement spring.
The partially spiraled:
Flexible polyamide 12 of chemical origin. Plasticized PHL, resistant to low temperatures, PA with excellent resistance to aging and dimensional stability at high temperatures with no migration of plasticizer. Available in blue, yellow, red and black.
Read More...
Discover more